MPM-LCD-C3

V14

2024-08-20

  1. Changed the jumping order of pages（The popping windows for reuse of gen port will show everytime the AC couple or smart load function is selected ）

  2. Changed the font type on programming page :

  3. Changed register reference of Generator rated power

  4. AC Start Charge Volt、AC Couple Start Volt、Generator Start Charge Volt changed to ：40~57V ; AC End Charge Volt、AC Couple End Volt、Generator End Charge Volt changed to ：42~59V

  5. Tip. End Volt should be higher 2V than start Volt .

  6. Off Grid Cut Off Volt changed to：40~56V

  7. Moved "Export to grid " "MAX. Export to grid(kW) "" Zero export " to Advanced page

  8. The upper limit of lead-acid battery capacity has been relaxed to 5000Ah

  9. The upper limit of the voltage setting range for AC Couple has been relaxed

  10. Fixing the issue of AC Couple Start SOC displaying 100% as 00

  11. Add another power settings corresponding to time period 2 for peak-shaving function

  12. When the EPS overload alarm takes effect, the alarm recovery countdown will display above the alarm information page

V10

2024-05-17

  1. Corrected word spelling under Advance page: Run without gird --> Run without grid

  2. Changed the description in Fault status page: Para master loss-->Para primary loss

  3. Changed Icon images:

  4. Para master loss --> Para primary loss ,2x208 master --> 2x208 primary,

  5. 1 phase master --> 1 phase primary,3 phase master --> 3 phase primary

  6. Changed Battery data background image:Bat Capacity

  7. Added "Grid Regulation :KIUC" and all bits moved forward 1 bit

  8. Changed fillin info of "Charge current limit","Gen rated power" parameters under Charge3 page

  9. Changed Lithium brand display under Advanced2 page

V7

2024-01-10

  1. Charged the background description of Debug page

  2. Changed the icon description of Debug page

  3. Changed the backlight time : From 300sec to 90sec

  4. Corrected the display error of Export_Today Energy

  5. Charged the background image of Basic setting page

  6. Charged the background image of Discharge setting page: Discharge control --> Operation Mode、EOD --> Cut-Off

  7. Charged the background image of Charge setting page: Charge control --> Operation Mode

  8. Corrected word spelling under Advance page: Gird --> Grid

PreviousMPM-LCD-S3(自研屏)NextMango Power APP

Last updated